About nishanthbabuece1

nishanthbabuece1 · 03-02-2018

I have a doubt in using regexp in my eem script. Can someone help me. My Script: event manager applet update-port-description event neighbor-discovery interface regexp GigabitEthernet.* cdp add action 1.0 cli command "enable" action 2.0 cli com...

nishanthbabuece1 · 02-23-2018

I want the below script to be applied only to particular ports of my 24-port switch. I don't want this to be applied to all my gigabit ports. Help me to make small changes in the script. Example : I don't want the script to be applied to port 5-10 ...

nishanthbabuece1 · 02-16-2018

This script provides neighbor device name and local port connected in the interface description: event manager applet update-port-description event neighbor-discovery interface regexp GigabitEthernet.* cdp add action 1.0 cli command "enable" action...

nishanthbabuece1 · 02-16-2018

Can someone help me understand the below script. Trim domain name - now with regexpVerifiy switch or router remote end. I don't want this script to update decription on AP's and so on.Do not update description if remote host and interface is uncha...

nishanthbabuece1 · 02-12-2018

Hi Guys,I have some doubts with the script , Actually I am trying to develop a script for auto port description update using EEM.I found there is a old script in the forum already but i need to make some changes in them.https://supportforums.cisco.co...

nishanthbabuece1 · 03-02-2018

event neighbor-discovery interface regexp .*GigabitEthernet0/[1-5]\s cdp add event neighbor-discovery interface regexp .*GigabitEthernet0.[1-5]\s cdp add Both didn't work, Help me understand the below one and help me on extending that to gi0/[1-1...

nishanthbabuece1 · 03-02-2018

Still its a No. interface regexp .*GigabitEthernet0/[0-9]+$ cdp add This one worked, Still If I change the limit to gi0/[1-15] , It stopped working. Check if you get some idea !

nishanthbabuece1 · 03-02-2018

Yeah , I tried that without brackets. Still the same.

nishanthbabuece1 · 03-02-2018

This Didn't work. Script didn't apply to any of the ports. Regards, Nishanth

nishanthbabuece1 · 02-16-2018

I was just curious about the words of that author," This will retain additional information in description like circuit id, vendor and so on even after a link failureIf description is changed, show old description in syslog message"Leaving them aside...

Member Since	‎02-03-2018 02:52 AM
Date Last Visited	‎04-02-2018 09:05 AM
Posts	16
Total Helpful Votes Received	5

User Statistics

User Activity

REGEXP doubt

EEM scripts Doubt

Auto port description update with Circuit ID's and other info

Automatically Set Port Descriptions using EEM

Auto port description update using eem in cisco switches and routers

Re: REGEXP doubt

Re: REGEXP doubt

Re: REGEXP doubt

Re: REGEXP doubt

Re: Auto port description update with Circuit ID's and other info