Hi everyone, does anyone have experience with integrating CUCM into Verint recording systems? I have a strange problem with the RTP port, from CUCM <> Verint I allow 16384 - 32767 / UDP but I don't know why when I try to capture traffic from FW, it s...
Hi Good People, Please help me to find out what exactly is the problem with my VG E1 PRI, incoming calls never reach call control. Call Control Team (Avaya) says, they never receive any logs coming from my router. However, if I check the debug output...
Hello all,Please help, maybe here someone once had the same problem. Currently, when I try to make a call to the Agent via UCCX, the agent can receive the call, but they can't transfer the call to another extension, the transfer button on IP Phone do...
Hi Good People, Hope someone here can help me solve my problem. I have problems with the process of incoming calls (FAX and Voice), but for outgoing calls it is normal. So, the condition is when an incoming call is received with dial-peer 200, for ex...
Hi Good People,Please help me to solve my problem. I have a CUBE that works fine for Voice traffic, and now I'm configuring the T38 protocol to enable the fax service. The problem is FAX can only send/receive faxes if the others are running on SIP to...
Hi @dstaudt I had the same problem with this, and in the Device Pool, we already had all the CUCM servers. But, the Jabber SDK doesn't register to the secondary server. I have two CUCM clusters, with the same domain, for example, ABC.co.id. The probl...
I'm using CUCM only for testing purposes, to make sure the signaling is working properly as I can't verify anything on Avaya's side due to Avaya's maintenance by another team. After that, I redirected the DP to Avaya and now incoming calls are workin...
I'm using CUCM only for testing purposes, to make sure the signaling is working properly as I can't verify anything on Avaya's side due to Avaya's maintenance by another team. After that, I redirected the DP to Avaya and now incoming calls are workin...
