Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
Wondering if anyone could shed some light. We have around 30 Cisco switches SG350X-48P. Due to on-going cyber security we are looking to update the switch firmwares. Unfortunately when I look for the firmware I am presented with different versi...
Hi,
I would like to utilise the GVRP protocol on our 29 Cisco SG350x switches. We currently already have 40 Vlans setup on each switch and as you can imagine changing or adding one vlan on each switch is a time consuming job. Previously we used to us...
Hi,
I currently have 28 Cisco SG350X-48p switches. These switches have different Vlans for our customers. We currently have a printer which is connected via the public ip. We would like to instead allow our customers to access this printer via our ...
Hi,
I have installed and setup a new Cisco 2069 switch and joined to our domain. recently I have noticed that Vlans have not copied over to this particular switch. I have created the Vlans on the core switch and all other switches have received thi...
So I can make the printer get an IP Address from DHCP on our main subnet of 10.0.0.0/24 but all the customer have different networks. They are all located in the same campus.
Hi,
Im little confused. I can make the printer get an IP Address from our DHCP internally. However our network consists of a lot of different VLANS for customers networks segments. how would I make it available via the intranet?
Hi,
I have changed the VTP password but this still has not downloaded the changes.
i have noticed that the configuration revision number is 0 but all my other switches are showing 9.
could that be the issue.
