About alexanderc

alexanderc · 04-25-2006

In the output of a traceroute is the IP address listed for that hop the address of the interface that the packet was received on or the address of the source interface that the router used for the return packet back to the traceroute source ?Thanks

alexanderc · 12-22-2004

When you apply shaping to an ATM interface, either on a router or on an ATM switch does this shaping only apply to the transmit direction of the PVC ?

alexanderc · 12-11-2004

Does Cisco now fully support ISIS a PE-CE protocol ?I cannot find much info on this on CCO.TIA

alexanderc · 12-09-2004

Looking through my MPLS course notes i noticed that they say if you are using statics for PE-CE connectivity then you "MUST" specify the outgoing interface even if you have already specified the next hop. Could someone please confirm if this is just ...

alexanderc · 04-25-2006

Thats what i thought. Thanks

alexanderc · 12-22-2004

Thanks for the quick reply Scott.Would i be right in saying then that with a 512k ADSL connection when we shape the ATM VC to VBR-NRT with 512 PCR/SCR at our central site this applies only to the downstream towards the CPE and that the CPE VC should ...

alexanderc · 12-09-2004

Thanks Rab :-)

Member Since	‎07-29-2004 06:45 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

Traceroute

VC Shaping

ISIS between PE-CE

Per VRF static routes

Re: Traceroute

Re: VC Shaping

Re: Per VRF static routes