About Alan Inman

Alan Inman · 02-03-2022

Thanks to @Rob Ingram for pointing me to this LINK the other day. That said, I'm confused with Step 8 forward. Specifically, if I'm going to manage the FTD via a data interface (outside interface in this case), why would I care about the management i...

Alan Inman · 01-31-2022

The FTD 1120 is currently paired to the FMCv using the diagnostic/management port, both FTD and FMCv are in HQ at the moment.However, the branch office that the FTD 1120 will be deployed to only has Outside Internet. No tie-back to HQIf I check "Enab...

Alan Inman · 07-08-2021

Folks Is it best to use Umbrella or Firepower when blocking access to applications such as FB, Pandora and URLs/IPs to org banned destinations? Why one over the other. We have both FTDs and Umbrella and unfortunetly leave rules on both blocking diff...

Alan Inman · 01-24-2021

Hey Pros, What is the best security practice for allowing guest users out to the Internet when connecting to our APs? I'm primarily interested in DHCP and DNS configuration. We use Cisco APs, firewall, and ISE coming soon. Internal network is a Wind...

Alan Inman · 01-04-2021

I like the CLI. My counterpart likes ASDM. Sometimes when troubleshooting I need to see if he made any recent changes. What command(s) would I use in the CLI to see recent configuration changes made in the ASDM? Thank you so much, Alan

Alan Inman · 01-03-2023

This worked for me (6.1.x) (Cisco DocumentationLog into the CLI of the FireSIGHT Management Center.Elevate your privilege level to the root user mode:admin@FireSIGHT:~$ sudo su -Enter this command into the CLI in order to restart the console:root@Fir...

Alan Inman · 09-29-2022

If I'm following correctly you initially configured the FTD on the same network as the FMC. Then you changed the FMC management interface to reflect the outside IP address of the FTD as it got moved offsite?

Alan Inman · 09-22-2022

Nice diagram @ipv6x. There is a LOT of moving parts in this. @keithcclark71 just did one of these, maybe he can shed some light on the process. I'll double back around and provide some documentation.

Alan Inman · 09-22-2022

@keithcclark71 this isn't a great answer, but I don't believe so. I'm looking at ours now, and we have 21 rules that are mandatory for all of our FTDs. This is called our "Parent Policy," and all of our other policies are nested under it. No matter w...

Alan Inman · 09-22-2022

@keithcclark71also ensure your logging is enabled on each rule so you can later troubleshoot events. For allow rules I do "log at end of connection" and for block rules "log at beginning of the connection." In our annual audits we always find a dozen...

Member Since	‎02-21-2018 06:05 AM
Date Last Visited	‎03-20-2023 03:08 AM
Posts	40
Total Helpful Votes Received	32

User Statistics

User Activity

Change the FMC Access Interface from Management to Data

FTD 1120 Remote Deployment to Branch Office Managed by FMCv

Firepower or Umbrella for blocking URLs, Applications, IP Addresses

Hospital Guest Wireless DNS and DHCP Best Security Practice w/ISE Coming Soon

ASA view configuration changes made from ASDM via CLI?

Re: FMC login page hung at "System processes are starting, please

Re: CISCO FTD 1140 deployment error

Re: FTD to remote FMC?

Re: FTD ACP Policy Inheritance

Re: Firepower IPS inspection