I have 2 PBX systems, both running with analog and digital phones. They are separated with a series of L2 switches. The PBXs have a VoIP NIC which connects to the network at access VLAN 10. It runs at SIP and RTP voice protocols. Phone end points fro...
Do we need to buy a separate IOS image for Cisco switches? For example, I will buy the WSC3650-8X24PD-L. Am I right to assume that this switch has a built-in IOS image, and I don't have to buy a separate image if not required?
Next question is, If ...
I have 2 existing 2960S switches stacked together, with 6 active port channel groups. Each channel group has 2x1GE links in a cross stack etherchannel fashion. Is it possible to add another channel group? Because from specs of 2960S, etherchannels ar...
PBX1 and PBX2 are connected via LAN (a series of L2 Switches, 3 switches to be exact). They are on the same subnet and VLAN. No experiene of drop calls so far, voice not breaking down, no echo too. What it experiences is sometimes its ok (phones of P...
Yeah, based also from my experience; usually I have a switch model and either LANBase or IPBase. The only additional unit with a price besides the actual switch model is the SNTC for the specific hardware that I ordered.This is the only time that I e...
Ok thanks Seb for your reply... Actually, the reason I ask about this is because I am trying to understand a quotation that was given to me. In the quotation it is indicated that I have 1 set of WSC3650-8X24PD-L along with its accessories (like AC po...
Hi Seb, thanks for your feedback. Just a follow up question...So the WSC36508X24PD-L switch has the recommended image at the time of manufacture... So, if not required by the client to change/upgrade the IOS image, I could still use the switch withou...
