Router at branch not showing interface up or down status ,when the interface getting disconnected .
Faced the issue of disconnection of interfaces, switch logs showings interface down but not logs in the router for the same.
Please advice -Solution
Cisco IOS Software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 15.1(4)M10, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2015 by Cisco Systems, Inc. Compiled Tue 24-Mar-15 09:00 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 2 years, 41 weeks, 2 days, 19 hours, 18 minutes System returned to ROM by reload at 17:00:43 UAE Thu Mar 10 2016 System image file is "flash:c2800nm-advsecurityk9-mz.151-4.M10.bin" Last reload type: Normal Reload
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to email@example.com.
Cisco 2811 (revision 1.0) with 247808K/14336K bytes of memory.
log settings :-
Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 1152075 messages logged, xml disabled, filtering disabled Monitor logging: level debugging, 0 messages logged, xml disabled, filtering disabled Buffer logging: level warnings, 3162 messages logged, xml disabled, filtering disabled Exception Logging: size (4096 bytes) Count and timestamp logging messages: disabled Persistent logging: disabled Trap logging: level informational, 1152079 message lines logged Logging Source-Interface: VRF Name:
Log Buffer (51200 bytes):
... View more
there is no reports showing in the reports view in the ACS.
am receiving notifications in the email and system operations>sheduled status showing export report error.
but no reports sheduled showing in the reports tab.
... View more
819 - Cellular interface interface - going down after some time.
do any body have solution for that.
Profile gone permanently down after an hour .
! chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK" chat-script LTE "" "AT!CALL" TIMEOUT 20 "OK" ! cts logging verbose ! controller Cellular 0 ! interface Cellular0 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation slip load-interval 30 dialer in-band dialer idle-timeout 0 dialer string hspa-R7 dialer-group 1 no peer default ip address async mode interactive routing dynamic ! interface FastEthernet0 switchport access vlan 99 no ip address duplex half speed 100 spanning-tree portfast ! interface FastEthernet1 switchport access vlan 99 no ip address spanning-tree portfast ! interface FastEthernet2 switchport access vlan 99 no ip address spanning-tree portfast ! interface FastEthernet3 switchport access vlan 99 no ip address spanning-tree portfast ! interface GigabitEthernet0 ip address 10.1.98.254 255.255.255.0 ip nat inside ip virtual-reassembly in duplex half speed auto ! interface Serial0 no ip address shutdown clock rate 2000000 ! interface Wlan-GigabitEthernet0 no ip address ! interface wlan-ap0 no ip address ! interface Vlan1 no ip address ! interface Vlan99 ip address 10.1.99.254 255.255.255.0 ip nat inside ip virtual-reassembly in ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ip nat inside source list 1 interface Cellular0 overload ip nat inside source route-map internet interface Cellular0 overload ip route 0.0.0.0 0.0.0.0 Cellular0 ! dialer-list 1 protocol ip permit ! route-map internet permit 10 match ip address 101 ! access-list 1 permit any access-list 101 permit ip 10.1.98.0 0.0.0.255 any ! control-plane ! ! mgcp behavior rsip-range tgcp-only mgcp behavior comedia-role none mgcp behavior comedia-check-media-src disable mgcp behavior comedia-sdp-force disable ! mgcp profile default ! ! ! ! ! ! ! line con 0 no modem enable line aux 0 line 2 no activation-character no exec transport preferred none transport input all stopbits 1 line 3 exec-timeout 0 0 password cisco script dialer hspa-R7 login modem InOut no exec transport input all line vty 0 5 password Cisc0123 login transport input telnet ! scheduler allocate 20000 1000 ! ! ! end
... View more