About network_geek1979

network_geek1979 · 04-16-2024

Team,We have a new Cisco Firepower 1120 just configured with basic configuration.After the admin user I added another user with the "configure user add" command.This new user can SSH to the device but cannot SSL.Further, I want to ensure that this ne...

network_geek1979 · 03-22-2024

Team,We have a requirement of configuring "lacp rate fast" on our Cisco switch. We understand that this is not recommended with SSO.In this case we are looking to configure this on a "N9K-C93360YC-FX2" switch. On these switch with no SUP failure capa...

network_geek1979 · 07-26-2023

Folks,We are trying to look at authentication methods using Cisco ISE as there are plans to phase out the 802.1x authentication.Anyone has any experience with Okta integration with the Cisco ISE? We are also aware about that posture assessment is one...

network_geek1979 · 07-24-2023

Team,We have a few Windows machine on our network. This machines are authenticated by adding their MAC address to a group on the Cisco ISE. With that having said these machines may also have the user certificates for the 802.1x authentication.Now wha...

network_geek1979 · 05-26-2023

Folks,How and where to create a login for the "api.cisco.com"? I was trying a simple GET to check EoL dates for a "WS-C3850-48P" and the response is Not Authorized. Any suggestions?This is what I am doing:https://api.cisco.com/supporttools/eox/rest/5...

network_geek1979 · 04-16-2024

Hi Rob, where can I configure that? I see I can go to Objects and then create a new user.However, it does not allow me to provide "MGMT" as the service types.

network_geek1979 · 04-16-2024

Hi, yes https works using "admin" userThanks,N

network_geek1979 · 04-18-2023

Thanks, the X factor is what is giving me the confusion. I am specifically looking at the hardware product with the PID mentioned.Regards,N.

network_geek1979 · 03-02-2023

@ahollifield : Thanks for the answer and apologies for the late response.Any details you can share on machine authentication? This is new to us and would like to check how this can work.Thanks a ton.Regards,N!

network_geek1979 · 02-16-2023

Hi BB,No not PXE boot. This is just the initial boot screen, i.e. when the Laptop is first powered on.(Or for that matter it is left idle for some time....even here we seen at times the "Employee VLAN" gets lost and the Laptop for in the "Guest VLAN"...

Member Since	‎03-20-2015 07:34 AM
Date Last Visited	‎04-17-2024 12:04 AM
Posts	158
Total Helpful Votes Received	28

User Statistics

User Activity

new user on Cisco Firepower 1120 unable to https

"lacp rate fast" configuration.

suggestion on authentication using the Cisco ISE

RDP to a Windows machine causes a disconnect with NAC enabled.

Not Authorized for "api.cisco.com"

Re: new user on Cisco Firepower 1120 unable to https

Re: new user on Cisco Firepower 1120 unable to https

Re: ASA EoL and EoS dates.

Re: NAC Policy for OS Boot vs Initial Boot

Re: NAC Policy for OS Boot vs Initial Boot