Hi,I'd really like to know what the ISE tacacs+ command set is for all interface-specific subcommands.  " Permit interface* " gets me into the interface configuration mode, but nothing within that mode. Is there a one-line command set that will inclu...

Hi   I would like to configure a couple of 7960G's using a 3750 switch but currently stuck on upgrade screen.    I have performed a hard reset of both phones and connected both to a 3750 switch with vanilla settings. The switch is the only source of ...

Hi there   I need some help with a company merger type scenario.   I have two sites: A and B. Site A runs OSPFv2 while site B runs EIGRPv6.    The topology of the main routers is quite basic:   Site A R1 <---> Site B R1.   Both of the main routers ar...

Hello,   I am creating a lab network that has NAT and an IPsec tunnel.   Since implementing NAT both on a packet tracer activity and physical equipment, I have encountered issues with communication over the tunnel. Prior to applying NAT, I was able t...

Hi all,   I am setting up a lab and need some help.    My environment consists of two sites. Site A and B. Each site has vlans 10, 20, 30, 40, 50 and so forth, but each respective vlan on each site has a unique subnet. That is vlan10 on site A has a ...