Hello Shri,   Layer 3 peer router command is required when you want to enable to routing over vPC ans this applies to all the Platform.   About  the error log, Remove the routed vlan from vpc peer link to a separated layer 2 trunk fixe this kind prob...

Hello Ahmed,   Are you talking about the vPC VSL bit? please provide information to get your quetion clarified.   Thanks, Shivakumar

Hello,   Fundamentals, L2==N5K1(MTU 9000)(et1/3)----------(et3/3)(mtu 9000) N7K-SW1 (mtu 1500)(et3/1) ------- (et3/1)(mtu 1500) N7K-SW2 (mtu 1500)3/4--------(et1/4)N5K2(MTU 9000) 1. First I have initoiated the Normal ping and it was succssefull with ...

Hello,   significance if "no ip redirect" on the interfaces to preserve the hellos and offload them from the CPU(To avoid software switching)   *** Rate All Helpful Responses ***   Thanks, Shivakumar

++ With the help of VRF you can re-use the same IP's in different VRF's. If multiple customers use the same subbet consider you are the Service Provider, how you are going to distinguish between them? - this is where RD pitch in to make the differenc...