About tornygard1

tornygard1 · 08-20-2020

As the title indicates, we have a problem with noise interference in external loudspeakers when Proximity is turned on. As soon as Proximity is turned of the noise is gone. We experience this in several rooms with the same configuration. Any theories...

tornygard1 · 01-04-2019

I have made a TCP dump from a Conference on the VCS expressway. The problem With the Conference is poor quality. Sending high quality, receiving CIF. The Call goes from Pexip Webapp --> Cisco VCS Control --> Cisco VCS Expressway --> Internet --> Ho...

tornygard1 · 04-18-2018

We have 900 systems anything from mxp to room kit. I need to find out what Ethernet speed each system is configured With . TMS shows only what has been negotiated, not what they are configured With. Any Ideas?

tornygard1 · 10-05-2015

We have a problem with our SX10 systems. The folder structure are being imported, but the entries for systems does not show. This is a problem that occured after that upgrade.. As far as I know it`s only SX10 systems.

tornygard1 · 09-24-2015

What does the Error message that I receive on our VCS mean? See attachment We use x8.6 SW version

tornygard1 · 04-18-2018

I don`t want to change it, and if I would, I would have used configuration templates in TMS. I just want to know what they are configured with., and hopefully list it in an excel sheet. Are they configured 100/full, auto/auto or other?

tornygard1 · 04-18-2018

Yes, believe me, I hav done some research. but this is not answer to my question either. The point is, I don`t want to go through 900 systems manually to find out how they are configured. Maybe I have to do som scripting, but I had hoped that I coul...

tornygard1 · 04-18-2018

As far as I can see, the topic in that Link does not answer my question; How can I find out how each endpoint is configured in regards of speed and duplex settings, without logging in to each endpoint..

Sorry for taking so long time · 07-13-2015

Sorry for not following up this post until now, but here`s an excerpt of the log.2015-07-13T14:50:33+02:00 server002 httpd[24520]: web: Event="Authorization Failure" Detail="Failed to authenticate; User cannot be authenticated by PAM" User="David2015...

Ok, here`s the logs. One from · 06-17-2015

Ok, here`s the logs. One from the master(working), and one from the slave(not working), But when using the DNS lookup tool I receive a response from the server with correct IP.

Member Since	‎03-21-2015 07:12 AM
Date Last Visited	‎08-25-2020 02:06 AM
Posts	22

User Statistics

User Activity

Webex pro - interference in speakers when Proximity is turned on

Determening Media used from TCP dump

Configured Ethernet speed

TMS 15.0.1 phonebooks on sx10

Error message.

Re: Configured Ethernet speed

Re: Configured Ethernet speed

Re: Configured Ethernet speed

Sorry for taking so long time

Ok, here`s the logs. One from