About sbosworth343

sbosworth343 · 02-24-2016

We are looking to deploy the Jabber for Windows client on tablets and wanted to know if there is a way to make dialing more touch friendly by showing a dial pad instead of only using the keyboard to input a number to dial. Thanks!

sbosworth343 · 09-22-2015

Is it possible for RTMT to send alerts when a SIP trunk goes out of service? I know that a Syslog entry gets made with the details but is there a way to turn that into an alert through RTMT or do I need to use a Syslog server?Thank You

sbosworth343 · 08-28-2015

We are starting to deploy 8800 Series phones and would like to know if it is possible to change the default ringtone on these phones via CUCM and not from the phone itself.The factory default ringtone is not appropriate for a professional environment...

sbosworth343 · 07-15-2015

Is it possible to see the IP address of the configured SRST server from the phone interface on the 88XX series of IP Phones?On the 79XX series it was possible to see the listing of CUCM Servers including any SRST references. Thanks

sbosworth343 · 06-03-2015

Is it possible with CWMS 2.5 to change the length of auto-generated Host and Participate access codes? We would like the codes to only be 6 digits if possible. Thanks

sbosworth343 · 09-05-2019

Hi Rémi,We used this when we changed a few thousand phone numbers, it would play a message saying this persons number has changed then forward to the new number for the user. It uses the Announcments within CUCM itself to play the message so you can ...

sbosworth343 · 11-29-2017

That feature was added in the 11.7 Phone firmware. In the 12.0.1 Phone firmware they removed this feature, upgrading is how we have gotten around this as we didn't like it either.

sbosworth343 · 03-16-2017

We are doing something very similar with External Call Control Profile on the line in CUCM. We have an html file on a webserver setup to return a CURRI response that just plays an announcement via CUCM before all inbound calls to a hotline. This will...

sbosworth343 · 07-11-2016

The latest device pack was released on Friday. It now supports ELM and I am using it on 10.5.2 without issue.

sbosworth343 · 06-07-2016

Hi Darren, In the latest firmware update for the 8800 series phones, 11.5(1), a new feature called Enhanced Line Mode was added. This allows you to use the 5 "session" buttons as line keys. The features on the phone are limited when this is enabled ...

Member Since	‎03-25-2015 11:07 AM
Date Last Visited	‎01-19-2023 06:02 PM
Posts	12
Total Helpful Votes Received	20

User Statistics

User Activity

Show Dial pad in Jabber for Windows

Alerts for SIP Trunk Out of Service

Change Default Ringtone

8851 SRST

CWMS 2.5 Access Code Length

Re: We are doing something very

Re: 8845 Icon near external mask #

We are doing something very

The latest device pack was

Hi Darren,