About stevechapman_2

stevechapman_2 · 03-15-2012

I have a remote building that has about 60 users. We are getting a layer 2 MPLS (opt-e-man) service point to point. I plan to have 2 network at the remote site 1 for data and 1 for voice. There are other vlans I need there for authorization as w...

stevechapman_2 · 12-15-2010

what are the max eigrp routes that ASA 5520, 5540, 5580? ThanksSteve Chapman

stevechapman_2 · 04-21-2010

I currently have 4 controllers with multiple vlans configure for one ssid. The vlans are group by building and each vlan is a /24 network. I have been asked to create one vlan per controller with a /21 network. I am worried about the size of this...

stevechapman_2 · 04-02-2010

How hard is it going to be upgrading our 3.3 to 4.0 anything I need to look out for?ThanksSteve Chapman

stevechapman_2 · 04-02-2010

Here my problem I need to be able to limit my AD users to a 10min access to the WLAN. I see you can do this for guest accounts, but you have to manually enter a username and password. I would like the web authentication to use our ACS which is tied...

stevechapman_2 · 07-26-2011

Ahmed,Can you explain how you resolved this issue. I have the same problem my vpn users can remote desktop to any inside pc, but users inside cant vpn to them. thanksSteve Chapman

stevechapman_2 · 02-17-2011

great post. Now the problem I have is the cert works fine for IE, but fails when used by firefox any reason why?thxSteve Chapman

stevechapman_2 · 12-15-2010

yes currently we have 13,000 routes (Internet 2 sites) and they are talking about supporting I1 routes down the road so it would be a total of 176,000 routes. at what point on the asa processor and memory would I start to get concerned?

stevechapman_2 · 04-23-2010

I currently have the peer to peer blocking set to drop so this stops client to client right? Does this block the broadcast or is there something else I need to configure like broadcast forwarding? Note: I am running version 6.0.182.0 layer 3 mode.t...

stevechapman_2 · 04-06-2010

Weterry,Thanks for the ideas I got it to work !!! Here what I did. Under the WLAN ssid under security tab then AAA servers I selected order used for auth and set it to radius. Then under Advanced tab I did Allow AAA override enable and set the ses...

Member Since	‎11-18-2009 08:38 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	12

User Statistics

User Activity

Layer 2 vs Layer 3 to remote site over layer 2 MPLS service

ASA and max routes

21 mask network on wireless

Upgrading from ACS 3.3 to ACS 4.0

WCS and Guest account / limited usage web authentication

Re: Remote Desktop to vpn client

Re: ASA VPN Load Balancing/Clustering with Digital Certificates Deployment Guide

Re: ASA and max routes

Re: 21 mask network on wireless

Re: WCS and Guest account / limited usage web authentication