About mgr

mgr · 05-08-2020

Hi, Does N93180YC-EX support FEC in 25G ports with 5m DAC cables with NX-OS? Cisco optics matrix link shows that this is supported for 3m cable, but no information available for 5m cables. Does this mean N93180YC-EX does not have support for 5m DAC ...

mgr · 01-23-2019

Hi, I am trying to configure profiling using Cisco ISE 2.4 to find out the devices connected to my switch interfaces before configuring them for 802.1x authentication. Cisco ISE profiling has lots of probes listed, but my query is : 1. Is it po...

mgr · 01-09-2019

Hi, We are planning to deploy ISE for 802.1x authentication for wired LAN. We want to authenticate the AD users who are logging in through domain PCs to gain access to network based on 802.1x. Please help me with the following scenario. 1. User...

mgr · 07-24-2018

Hi, In our data center network, there is a requirement for having hybrid overlays as there is a mix of vmware NSX-v and physical work loads. There is a scenario in which hosts in the same subnet are spread across the physical and virtual environme...

mgr · 07-17-2018

Hi, We are planning to deploy Cisco ISE in our environment for both 802.1X authentication and Tacacs+ for Network device administration. Is there an option to configure Tacacs+ logs being sent from PSN to external log servers other than MnT node?

mgr · 01-22-2019

Hi, Thanks for your response. I would like to try the windows native supplicant and i am fine with the authentication in succession - machine authentication during bootup & user authentication later. Could you please let me know if there are any gu...

mgr · 01-21-2019

Another question - I am trying to authenticate a corporate user with a corporate device to gain access to the network. The corporate device has two certificates – one for the machine, another for the user. I want to match the hostname of the computer...

mgr · 01-09-2019

Hi Jason, Thanks a lot for responding. This answers my query. The link is very useful as well.

mgr · 07-24-2018

Hi, Thanks a lot for your response. I have responded to your queries. The NSX in my environment is getting restricted to Leaf1 & Leaf2 which i had shown in my diagram. My physical server is not connected to leaf2 and so it does not have layer2 adja...

mgr · 07-16-2018

Hi, To make myself very sure, Is the below mentioned diagram a valid design for positioning the ISE components? I am planning to position two PSNs one in each data cener. In case, the local PSN fails, the endpoints need to authenticate with the other...

Member Since	‎02-04-2016 03:42 AM
Date Last Visited	‎06-08-2020 01:40 PM
Posts	16
Total Helpful Votes Received	5

User Statistics

User Activity

N93180YC-EX support for FEC in 5m DAC

ISE 2.4 profiling

Cisco ISE 2.4- AD Authentication

Hybrid overlays with MPBGP - EVPN

ISE logging other than MnT node

Re: Cisco ISE 2.4- AD Authentication

Re: Cisco ISE 2.4- AD Authentication

Re: Cisco ISE 2.4- AD Authentication

Re: Hybrid overlays with MPBGP - EVPN

Re: ISE deployment in two data centers