LS,
I'm trying to configure CoA in our lab.
If I open a browser on the client I don't get automatically redirected to the guest portal. If I copy and paste the URL that I find under URL redirect manually, I get there. If I then login with an AD user...
Hi all,I had a strange problem with the redundancy between two of my CSS11000.They were both master at the same time. With resulted in total apocalypse :(07:44:35 5/1 49369 IPV4-4: Duplicate IP address detected: xxx.xxx.xxx.xxx xx-xx-xx-xx-xx-xx 07:4...
Hi,Maybe this is a stupid question. But I'm going to ask it anyway :)If I set the max connection on a service can I redirect the connections that are over the max connection to an error page?Or I'm I looking in the wrong place. I'll try to explain wh...
Hi All,When I do a sh ver on my cisco 2610 I get the message:%Error: No System flash chip information availableNow in the running config I see standing partition flash 2 16 0. It looks its saying that their are 2 partition in the device. I tried no ...
Hi All,I'm trying to upgrade the ios of a 2500 I just bought for my home lab. I'm getting a checksum error after he downloaded the ios from the tftp server.Things I tried:- check if their is something wrong with the ios on the tftp server. Checksum i...
Hi Pete,Thanks for the help guys. We are really appreciating this a lott. We have here 6 CSS running now for almost 3.5 years. Once we had a hard disk failure a year or so ago ,on one of them, and now this. The hard disk failure wasn't so bad beca...
Hi Pete,Thanks for this information. I didn't know it worked like that.Just one more question about the polls. What happens with the master if it doesn't receive any more polls from the Backup? Why did the MASTER became backup? CCS01 was the master ...
Pete, Gilles,Yes, port e12 is the connection between the both boxes. But at 09:01:08 I submitted the reboot command at CSS02.5/1 48376 NETMAN-4: Reboot command entered via CLIWith resulted in 09:01:12 to a down of the port at CSS01. They are connect...
Pete,Yes. Port e12 is the connection between the both boxes.I'll have a look at the config immediately again. I guess I misssed that. With kind regards,Geert Hermans
Hi Pete,First of all thank you for your reply.It is possible the MASTER was so busy that it did not answer the heartbeat polls to the backup and also could not process the sntp polls ? That could be possible but explain me than this. Let’s say he’s ...
