HelloIs there a CLI command to obtain unused objects on the FMC?We are using FMC with firmware 6.4.0.4Right now the FMC has nearly 18,000 objects and we need to eliminate the ones that are not used. Regards
Hello We have to configure a Firepower version 6.2.3.10, we have a show run configuration and I need to activate the next configuration.... bgp-community new-formatcommunity-list standard COMM_DEFAULT permit 0:2000 Where in the FMC, that manages the ...
Hello We have a FTD managed by a FMC, the RAVPN (Anyconnect) is working fine but we need to activate BGP so it can propagate the segments the FTD has to its neighbors. Today, only the segments the FTD has an interface in it are propagated to the BGP ...
Hello I have an FTD 2110 and some how a manage to change management port to 1... ===============[ System Information ]===============Hostname : ftd2110-1DNS Servers : 208.67.222.222208.67.220.220Management port : 1 <------- should be 8305Help, becau...
HelloWe want to integrate Firepower with ISE via pxGrid.We do not have a internal CA server so we want to use ISE as internal CA with local self-sign certs.As far as I know on Firepower I need to generate a CSR so it will be signed by CA (Cisco ISE) ...
Hello I used Flexconfig to add the line "bgp-community new-format"The COMM_DEFAULT was configured on "Community list" in the object section in the FMC.Once added the flexconfig the 0: appear on every community configured. So the requirement was succe...
Hello I manage to solve the problem using the command: > configure network management-interface tcpport 8305Management port changed to 8305. Now it shows the correct port and can register the FTD to FMC...> show network===============[ System Informa...
I did a quick review of the document...Its is mandatory to integrate FMC to Active Directory?We can use RTC without an identity policy using only Access Policy w/Intrusion Policy?Thanks
HelloJust to inform, we identify the issue and the solution.ISE was adding the "Connection Time Out" option, once the ISE admin identify the error they change the value to 4hrs because the client requested. Thanks.
