Hi All,
I'm having trouble with my current WLC 3504 with the latest firmware from Cisco (8.5.120). It's going to be long story but i'll try to make it less boring as possible.
i have 2 unit of WLC 3504 with are in the same firmware which are now ...
Hi All,
Thank to everyone contribution and suggestion, Found out in this WLC management interface once i configure it to VLAN 8 and on my switchport in trunk mode i must include native vlan X where X cannot be the same as vlan 8. Not sure why cann...
Hi @Flavio MirandaAppreciate the advice but not to be confuse, Lets put it this way, My single 3504 unit is connected to a 24 port switch (WLC3504 yellow port 1 to switch port number2) and my laptop is connected also on the 24 port switch but on port...