About celestin.kouacou1

celestin.kouacou1 · 04-07-2022

Hello,I have 2*ASR9006 connected to 2*Juniper SRX , as described in the picture.Both SRXs are working in active-standby mode (SRX01 is active and SRX02 standby)A bridge domain is configured between both ASRs and both SRXs. VRRP running between both A...

celestin.kouacou1 · 06-06-2021

Hello team, I have 2 ASR9006 connected to a firewall.IRB and VRRP are running on both ASR9006.I have activated interface tracking on the VRRP, but the tracking shows "down" state while the physical interface is UP. Below is the configuration on ASR01...

celestin.kouacou1 · 05-24-2021

Hello Team, I have installed new A9K-4X100GE-SE card on ASR9006 router.Till yesterday it was working fine and for unknown reason the state has changed from “IOS XR RUN” to “BRINGDOWN”.The card is not operational and services are now interupted. And I...

celestin.kouacou1 · 05-19-2021

Hello everyone,I'm currently facing an issue with traffic load-balancing on bundle interface.In the attachment file is my network diagram.1. There is a LAG (BE5) of 4 members between ASR9k6-R1 and ASR9k6-R22. The downlink flow is ISP_02 -> ASR9k6-R2 ...

celestin.kouacou1 · 12-05-2018

Hi everyone, I'm trying to configure "event notification" by email with my CISCO Prime NMS 4.3.1. The SMTP server requires to configure authentication method (with login and password) in addition to the server IP address. How do we add or update the...

celestin.kouacou1 · 04-11-2022

Hi MHM Cisco World, I’m not allowed to perform a debug on the system for the moment because it is in production.I will do the debug once I get the approval.But I still think that this is not due to ICMP redirect.Let me explain again:I have 2 ASRs and...

celestin.kouacou1 · 04-08-2022

Hi MHM Cisco World,Thanks for your reply.I'm not sure that this is ICMP redirect message.The graph from the monitoring tool, shows very high traffic on that link.[cid:image001.png@01D84B6D.1DA9B7D0]RegardsKouacou Célestin

celestin.kouacou1 · 06-08-2021

Hi team, Yes it working now.Below is the final configuration file.thanks for your great support. interface Hu0/3/0/0.44description DO_NOT_DELETE_USE_4_VRRP_intf_TACKINGipv4 address 10.156.65.129 255.255.255.252encapsulation dot1q 44router vrrpinterfa...

celestin.kouacou1 · 06-08-2021

Hi team, This link gives more details:https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-1/addr_serv/configuration/guide/ipaddr_cg41a9k_chapter10.html I think the track interface is still down because it is a l2transport interfac...

celestin.kouacou1 · 06-08-2021

Hello Giuseppe,Primary link ASR01 <> SRX01 is UP/UP.Secondary link ASR02 <> SRX02 is UP/UP too.Celestin@oumpbn-SRX5600-node0> show interfaces terseInterface Admin Link Proto Local Remote...xe-3/0/1 up downet-3/1/0 up up <<<<<< Primary linket-3/1/0.13...

Member Since	‎03-01-2017 05:29 AM
Date Last Visited	‎04-20-2022 01:00 AM
Posts	18
Total Helpful Votes Received	15

User Statistics

User Activity

Traffic distribution Bridge domain members

VRRP tracking interface down

A9K-4X100GE-SE card in BRINGDOWN

load-balancing not properly working on Bundle-Ether l2vpn - ASR9006

SMTP authentication method CISCO prime 4.3.1

Re: Traffic distribution Bridge domain members

Re: Traffic distribution Bridge domain members

Re: VRRP tracking interface down

Re: VRRP tracking interface down

Re: VRRP tracking interface down