About e.rapaccioli

e.rapaccioli · ‎02-14-2019

At the momenti i can't try this change, i'll be carefullly to try and give you feedback you the next week. Thanks so much.

e.rapaccioli · ‎01-29-2019

This is just the last revision whit static LAG ABSTRACT OF 9500-X interface TenGigabitEthernet1/0/1 switchport mode trunk channel-group 1 mode on interface TenGigabitEthernet2/0/1 switchport mode trunk channel-group 1 mode on interface Port-channel1 description LINK_TO_SW-L2-CED1 switchport mode trunk ABSTRACT OF 2960X interface GigabitEthernet1/0/25 switchport mode trunk channel-group 1 mode on ! interface GigabitEthernet1/0/26 switchport mode trunk channel-group 1 mode on interface Port-channel1 switchport mode trunk

e.rapaccioli · ‎01-29-2019

Hi, i have configured a multicassis etherchannel between some catalyst 2960x and two C9500-x configured in stackwise virtual. I''m encountering this issue, when i boot all the stackwise at the same time the LAG work proprely, but if the only standby member reload when it completed the boot the remote switch 2960x place the connected port in suspended mode and the switch stop propagate traffic on all bundle port. I have the same issue whit LACP, PAGP or static mode. Any ideas? Thanks

e.rapaccioli · ‎08-16-2018

Hi, can anyone help me about DNA licensing? The question is... If i want manage my 9400 series switch by CLI (traditional mode), Am i obligated to purchase anyway DNA license or not? Thanks and kind regards. Emiliano

Date Registered	‎04-04-2018 12:21 AM
Date Last Visited	‎02-14-2019 11:58 PM
Total Messages Posted	4

Re: LACP SUSPENDED STATE

Re: LACP SUSPENDED STATE

LACP SUSPENDED STATE

CISCO 9400 DNA LICENSE