Hi, Since 802.1q tunneling is not supported on 4500-X with VSS, are there any alternative technologies we can use to tunnel L2 VLANs to a separate DC? Thank you,Nick
Has anyone checked whether BDRL (Bi-Directional Rate Limiting) is supported on relatively new 702W APs. I need it to work in FlexConnect mode. Thanks,Nick
Hello Everybody,I have this MGX 8880 installation at the customer site with VXSM-24-T1-E1-BC back card.The documentation is pretty scarce on this and it recommends some Ortronics Patch panels that are EoL.Can anyone explain what type of currently ava...
Hi,I have a SIP phone with two lines.I'm thinking of registering it on a CUCM as a Basic Third Party SIP Device as I don't need to use both lines.One line would be enough for me.Would this would work on a CUCM 7.1?Thanks,Nick
Has anyone tried making Cisco IP Phones with a SIP image work behind a third party NAT router in a remote location, with CCM 5.X in HO?Any help would be highly appreciated.
Dear Alex,Thanks a lot for your elaborate explanation.I would like to stress the point that the mentioned documentation is outdated as MGX doesn't ship with two separate cables for transmit and receive, but with a single Y-cable (PN: CAB-RBBN-24T1E1)...
Alex,Thanks a lot for your response.I have seen the URL with the pinout that you've mentioned, but the problem is that I failed to find any patch panel (with RJ-48 receptacles) from any vendor that would match the requirements.Do you by accident have...
