About John McAloney

John McAloney · 08-22-2012

I have a new RV180 with the latest firmware I can find, and a new RV042v3 with the latest firmare I can find. On the RV042v3, I factory defaulted it after the new firmware, restored from backup, removed the tunnel, and put it back again. I have thr...

John McAloney · 07-20-2016

I have two RV042 V3 that I have tunnels to from a D-Link DSR-250. I used to have an RV180 but the vpn connections didn't work so I got the D-Link. On the two RV042's if i make a configuration change (such as SHA 128 to 256 or DH2 to DH5 or the reve...

John McAloney · 08-24-2012

Update. To remotely access the RV042v3 with 443 https, you have to append the :443 to the ip address. I was able to get one of the dead tunnels working, but the RV180-rv042v3 still does not work, using AES-128/SHA-1/DH2, fixed ip on both ends. An...

John McAloney · 08-23-2012

I am having the same problem with an RV180 to RV042v3, will not work. the RV180 does hold tunnels with two RV042v1's and an old Zywall 2, but will not establish with an RV042v3. Latest firmware on both. Thanks!!!

John McAloney · 08-23-2012

Based on my actual experience with an RV180, it is not doable. I have the same need, and let go of a rock solid Zywall 2 plus because it would only handle 5 tunnels. So far the RV180 will only really keep up three tunnels. Maybe need newer firmwa...

Member Since	‎08-22-2012 05:15 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

vpn rv180 rv042v3

I have two RV042 V3 that I

vpn rv180 rv042v3

Re:RV180 to RVS4000 Site-to-Site VPN Tunnel?

RV180 VPN site 2 multisite