About Nabil.

Nabil. · 05-21-2019

I have a couple of WS-C4507R+E running in VSS mode, and I'm trying to upgrade the license for the standby peer, and I'm trying to find the best procedure to do this with the minimum service interruption.My plan is to do a vss switchover redundancy fo...

Nabil. · 05-21-2019

Hello Guys, I have a couple of WS-C4507R+E running in VSS mode, and I'm trying to upgrade the license for the standby peer, and I'm trying to find the best procedure to do this with the minimum service interruption.My plan is to do a vss switchover r...

Nabil. · 05-21-2019

Hello Guys, I have a couple of WS-C4507R+E running in VSS mode, and I'm trying to upgrade the license for the standby peer, and I'm trying to find the best procedure to do this with the minimum service interruption.My plan is to do a vss switchover r...

Nabil. · 05-15-2019

Hello folks,I'm trying to find a way (GUI or CLI) to transfer or export backup files from ISE towards tftp or any other type of communication. I hope you can help me in this regardThanks in advance Regards,

Nabil. · 11-06-2018

Hi Folks, I have Cisco ISE in my network, and currently its running normally with IOS version V12.0 à V15.0, however I had tried to add several SWs 3560x with IOS V15.2, but it didn’t join ISE, I have included some details below, and I hope you can...

Nabil. · 05-22-2019

You highlight a very important point, I'm putting in my plan disabling all backup links to avoid the dual-active scenario.From a license perspective, do I need to reload after applying " #license install bootflash: "or no need?Thanks,

Nabil. · 05-22-2019

Thank you, folksActually, I'm installing a new ordered enterprise license instead of the Right to use evaluation one, but in order to have a minimal outage. I'm gonna disable VSL links/ports in order to isolate both of 4507 and keep the active one ru...

Nabil. · 05-22-2019

Thanks,

Nabil. · 05-21-2019

below is device details:================================sho switch virtualExecuting the command on VSS member switch role = VSS Active, id = 1Switch mode : Virtual SwitchVirtual switch domain number : 10Local switch number : 1Local switch operational...

Nabil. · 05-21-2019

below is device details:================================sho switch virtualExecuting the command on VSS member switch role = VSS Active, id = 1Switch mode : Virtual SwitchVirtual switch domain number : 10Local switch number : 1Local switch operational...

Member Since	‎09-04-2012 07:47 AM
Date Last Visited	‎05-29-2019 12:06 AM
Posts	13

User Statistics

User Activity

License activation for VSS standby peer (WS-C4507R+E)

License activation for VSS standby peer (WS-C4507R+E)

License activation for VSS standby peer (WS-C4507R+E)

Exporting backup files from Cisco ISE 2.2

3560x can't join Cisco ISE with version v15.2

Re: License activation for VSS standby peer (WS-C4507R+E)

Re: License activation for VSS standby peer (WS-C4507R+E)

Re: License activation for VSS standby peer (WS-C4507R+E)

Re: License activation for VSS standby peer (WS-C4507R+E)

Re: License activation for VSS standby peer (WS-C4507R+E)