About rashmi.kumari

rashmi.kumari · 08-28-2012

Hi Everyone,We have a video infrastructure where1)vcs control x7.12)cucm3)sme session manager editioncall flow between endpointsvideo endpoint->vcs control->cucm zone->cisco session manager edition->cucm->cisco iphonesproblem facing1)while calling to...

rashmi.kumari · 08-27-2012

Hi Everyone,we have a video infrstructure in which there is a1)VCS control verX7.12)VCS expressway ver X7.13)TMS 13.2we have recently upgrated tms 13.1 to 13.2 and installed TMS provisioning extension on TMSAfter installation of provisioning extensio...

rashmi.kumari · 07-18-2012

Hi Everyone,We are using VCS starter pack for login jabber video clients from outside using external ip address and able to login successfuly and initiate video call using old movi version 3.1 but when we are using new jabber video version 4.4 ,its ...

rashmi.kumari · 07-11-2012

Hi Everyone,We are getting issue in login VCS expressway over internet ip, it gives login expire error.but it is working when we browse over local IP.We have cleared all the browser history but then also its showing the same error.Please suggests wha...

rashmi.kumari · 06-01-2012

Hi Everyone,We have a one video product c20 and last few days we are facing an issue of rebooting Whenever someone plug or unplug the LAN cable from the LAN port ,it starts rebooting itself and gets hang frequently.Will factory reset helps in solvin...

rashmi.kumari · 09-04-2012

Alok.Thanks for your help and support.

rashmi.kumari · 09-03-2012

Hi Alok,Thanks for the solution.can we change the endpoints H.323 id in TMS by going system>navigator>settings>view setting>call settings>h.323id

rashmi.kumari · 09-03-2012

Hi Alok,we are using TMS 13.2 along TMSPE feature Can we achieve something with the help of TMS

rashmi.kumari · 09-03-2012

Hi Alok,Thanks for your advicenow we are to see the H.323 id after changing the id value on endpoints.But the problrem is that there are more than 70 video enpoints in different locations so it become difficult to manually change the h.323 id on each...

rashmi.kumari · 08-30-2012

Hi Alok,After doing a change in H.323 id value as 91120@video.hcl.com ,we made a audio test call between tandberg mxp1700 and ip phone 7942 but it showing the same thing unknown no on ip phoneand If we do the vice versa ,making a call from cisco ip p...

Member Since	‎08-07-2011 11:19 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	39

User Statistics

User Activity

call problem with video ip phones

configuartions alarms on vcs

login problem with jabber 4.4

vcs expressway login error

c20 reboot problem

Re: call problem with video ip phones

Re: call problem with video ip phones

Re: call problem with video ip phones

Re: call problem with video ip phones

Re: call problem with video ip phones