Hi, I am trying to make a GRE tunnel in a vrf on IOS-XR.I am able to make the tunnel interface up, but I am not getting the local IPs assigned to the Tunnel interface being shown in the vrf table. My final aim is to form BGP with the local IPs assign...
Hello, I have tried to simulate a NNI option B setup , with My PE routers being IOSv and ASBRs being IOS XRv. SP1-PE1 <-------> SP1-ASBR1<-------->SP2-ASBR<--------->SP2-PE2 I have made Loopbacks on SP1-PE1 and SP2-PE2 and tagged them under respectiv...
Hi All, I am exploring the features of BGP Graceful Maintenance in IOS XR environment.I am facing difficulties to configure gshut community as I am not able to find any document for configuration guidelines for BGP graceful shutdown for IOS XR. When ...
Hello George, I also read the same comment in some article. But surprisingly it worked for me by just putting next hop IP address as the next hop.Note: I also made the VPNv4 eBGP peering with the loopback IPs instead of P2P IP addresses. RP/0/0/CPU0:...
Adding Below the VPN labels output from all the 4 routers. SP1-PE1#sh ip bgp vpnv4 all labelsNetwork Next Hop In label/Out labelRoute Distinguisher: 10:1010.10.10.10/32 192.168.10.2 nolabel/24001Route Distinguisher: 20:2020.20.20.20/32 192.168.10.2 n...
