About pdesch

pdesch · 05-19-2009

Is there an administration guide for customizing the 7945G and 7965G in CUCME? I'm running CUCME 4.2 and all the documentation I can find is specific to CUCM. Also, is Cisco Phone Designer supported in CUCME, or are there plans to support it?Thanks

pdesch · 09-15-2008

I know this works with routers, but can't seem to get it to work on the ASA 5510 (8.0(4)). Basically, the requirement is for multiple L2L IPSec Tunnels to terminate to multiple external IP addresses on the same ASA. I have the crypto maps configured ...

pdesch · 07-25-2008

I have a 4240 IPS in inline interface mode between our edge firewall and core switch. This connection is a trunk port with 2 VLANs, lets call them A and B. Everything works 100% fine between VLANs (the firewall is doing the inter-vlan routing) with t...

pdesch · 11-07-2007

I found a few threads about 3rd-party SIP phone support in CM...but what about CME? I haven't found any official announcements or documentation on CCO or here in the forums. I'm running CME 4.0 and it definitely doesn't appear to be supported...maybe...

pdesch · 04-13-2007

My question is: Are there limitations/nuances for configuring IPSec tunnels on Catalyst 6500s in software (without the VPN module).I recently took over a management of a Catalyst 6500 and have run into a roadblock while trying to configure an IPSec t...

pdesch · 09-05-2012

Assuming you can ping both firewalls, the problem is that the firewall pair shares the same config and therefore, the same SNMPv3 engineID. Some NMSs (e.g. WhatsUp Gold) do not support this and therefore only 1 firewall in the pair can be queried.Doe...

pdesch · 04-15-2011

For what it's worth, we're having the exact same problem. Hopefully this gets fixed soon. I haven't seen any new releases in the download center.

pdesch · 07-20-2009

In case you weren't aware, the ASA 5510 does support failover with a Security Plus license.

pdesch · 05-22-2009

Let me rephrase...I need to know where I can access the "phone specific configuration" in CUCME.In CUCM you go to devices->phone->phone specific configuration in the GUI, but I see no such thing in the CUCME GUI...is this just a limitation of the CUC...

pdesch · 05-19-2009

Well back to my original question then...where is this admin guide? All I see is the one for CUCM (http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/7_0/english/administration/guide/65adm70.pdf)

Member Since	‎03-08-2006 10:59 AM
Date Last Visited	‎04-24-2018 11:37 PM
Posts	33
Total Helpful Votes Received	5

User Statistics

User Activity

Documentation for customizing 7945G/7965G in CUCME?

Can L2L IPSec tunnels be terminated on ASA subinterfaces?

4240 blocking some traffic between local VLANs

Third-party SIP phone support in CME?

Cat 6500 IPsec support in software

SNMP does not work on the standby ASA firewalls

Re: ASA 5510 Upgrade to 8.4.1 Lost SSH

Re: copy config from asa5520 to asa5510

Re: Documentation for customizing 7945G/7965G in CUCME?

Re: Documentation for customizing 7945G/7965G in CUCME?