I plan on upgrading a network I am working on for a new internet connection. We are bumping from a 16 Mbps internet connection to a 50 Mbps connection. I also want to run the Cisco firewall module on it. I am currently running a Cisco 1841 with Adv S...
I have several Aironet 1231G APs I am configuring as part of a new network. I want to have 3 VLANs (Vlans 2,3,4). Is there a way I can put the management IP, which will be the IP address for BVI1, on the vlan 2 subnet? It looks like the way I have it...
We have had an issue in the past couple of week with an Fxs port all of a sudden. It is normally a fax line, but when troubleshooting, we realized that you could hear someone on the other end of the line, but they couldnt hear you. It was the same th...
Hey guys, I am trying to change wpa2 key on an Aironet 1231g access point. Once I change they key, clients cannot authenticate to the access point unless they either change the password or forget and re add the network on the client device. Is there ...
I have 2 (for now) Aironet 1231g access points setup. They each have two SSIDs being broadcast on each one, both are the same two SSIDs. The question is, can can two different ssids from a single ap broadcast on the same channel. That means I would h...
Haha. I see we think along the same lines. I completely agree with you about the people telling us “just use Meraki.” You seem to be in the same boots as me. When you hit a certain point (feature or size) Meraki just doesn’t do it the same. A Cisco S...
Gotcha, we are running pretty much the same setup then. I might spin up a virtual WLC trial and get an AP to test. If things stay this way I’d be able to sell the costs for sure if it meant better user experience. I’ve only got it deployed at my DC a...
Richard,I definitely am still dealing with having to enter http only, but since I posted in another thread about the "fix" which only makes it less frequent for us, one of my branch offices has been reporting issues even going to just http. I don't s...
Saw this on my end this past week. I had to rebuild a sensor due to 2 bad SSD drives on my 5545-X. What I found was the initial health policy was applied even though the device info told me the custom policy I created when I set the FMC up was appl...
