Dear all,µWe have 2 routers. One of the router has 2 HSSI interfaces and the other has 2 HWIC-2T.Each HSSI is connected to one port of each HWIC-2T interface.We used to configure MLPP between same models WIC.Using the same best practice configurati...
Dear all,Does someone has already encountered the following ?I have two routers CISCO2851 linked by microwave with E1 interface (VWIC2-2MFT-G703). I have too much CRC errors on both E1 interfaces when one of the routers is connected to LAN switch. Bu...
Dear all,Does someone has already encountered the following ?I have two routers CISCO2851 linked by microwave with E1 interface (VWIC2-2MFT-G703). I have too much CRC errors on both E1 interfaces when one of the routers is connected to LAN switch. Bu...
Dear all,I encounter a really bizarre issue for our file sharing services passing through WAN. Copying process is always aborted within 5% progression. We use E1 link with 2 Mbps. Sometimes, the bandwidth is saturated by sometimes not. But the proble...
Dear all,Does someone has a document listing all default threshold value on Device Fault Manager (DFM) of LMS ?Particularly, I need to know the thresholds for :- Interface HighUtilization alert, and- Interface HighQueueDropRate.Thanks in advance.
Giuseppe,Thanks for your prompt reply. I confirm that I use routing over the E1 link. How can I check and solve this burstiness traffic generated by the LAN switch (WS-C3750G-24TS). With the PC, for testing purpose, I used WAN killer generating non-s...
Hi Joseph,Sorry for the late reply but we passed a nightmare with this problem. We had CRC errors on both end of the 2 routers. The link provider delivered a new link, which we tested with no error. We installed two new routers with two new E1 card (...
Hi Joseph,Thank you for your prompt reply. Much appreciated. I attach both "Show interfaces" and "Show Controler E1". It appears that there is some errors on WAN and LAN interfaces.WAN Interface :4120 input errors, 4120 CRC, 884 frame, 477 overrun, 0...
Hi Lucien,Thanks for prompt reply.I saw these thresholds related to device performance but not interface. Do you have values for 100 Mbps Ethernet:- Interface HighUtilization- Interface HighQueueDropRate.Thanks.