Hello,I have convert C9120 ap from Embededd WLC to CAPWAPP.Unfortunatelly, I don't know if there was a factory reset or something else, but my AP are joining one local AP Embedded controller that I had already convert !I have to convert once more the...
Hi, With the Anyconnect client (mine is 4.9) on windows 10 laptop, when you lose the network, wifi for example, there is no network loss notification. Is it possible to bring up a popup to indicate this loss of network and how can I do ? thanks, Gill...
Hi, On a catalyst VSS switch, I can connect with the username toto (privilege 0) but I don't have the enable command available to change the configuration. The configuration file is like :username toto privilege 0 ....privilege exec level 15 enable T...
Hello all, I have to regenerate CUCM certificate (callmanager,tomcat, capf, tvs). Unfortunatly, they are already expired !My CUCM is a 11.5 version and is in mixted mode. So, I 'll have to update the CTL file after the regeneration of the certificat...
Hi all, I try to update and install LSC certificates on my CUCM 11.5, but there are 2 types of issues : 1/ after the csr have signed by the external CA, the CUCM import the LSC, extract and parse the .der, then when installing on the phone, still sta...
Hi,it doesn't seem to be the same problem because the AP start booting in U-boot but can finish the boot process and can register to a WLC. It does not stay in "stuck in Bootup with 'Uncorrectable ECC Error' Displayed"Thanks
Yes, this is my problem ! if we are installing an AP with Embedded controller on the lan, each time an another AP will reboot, it can connect to the local controller and not to the centralized WLC ?exept an ACL on each AP switch port, how can I get ...
Hi,Notifications are enabled but no logout popup. when the network connection arrives, there is indeed Anyconnect which brings up a popup, but when disconnected, nothing.... The question was mainly about bringing up a popup when the VPN disconnected...
2eme issue found : when you abort a LSC installation on a phone, You'll have to restart the phone otherwise it fails : the phone did not received successfully the abort command.
Hi, no I don't. I haven't change the cop file for canadian because I think we are going to upgrade the platform. I am waiting for the autorization to udgrade....it can takes months !
