OK, so this one looks good now, I see the mid-call INVITE for T38, GW responds with 200 OK, then the GW receives and ACK...no more 2nd mid-call INVITE. This tells us the call negotiated T38 succesfully.After the call switches to T38 I see T30 packet...
Looks good, for the most part.The call connects, then the fax server sends a mid-call INVITE for T38:020197: *Dec 29 09:30:42.492: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received: INVITE sip:001603617809@192.168.5.12:5060 SIP/2.0Via: SIP/2.0/UDP 1...
The fax server is sending a mid-call INVITE for T38 caps after the call has been answered and set up for voice...this is normal:*Dec 15 14:46:38.242: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received: INVITE sip:003039735299@192.168.5.12:5060 SIP/2....
Looking at the debugs, I never see the call get answered, I only see the call go into ALERTING state and then 31 seconds later the calling fax hangs up...the call is never answered.Do they have this fax set up for "auto answer"?If they do, how many r...
Yup, CUBE is supported on the 3725 platform, see below:http://www.cisco.com/en/US/customer/docs/ios/voice/cube/configuration/guide/vb-gw-overview_ps5640_TSD_Products_Configuration_Guide_Chapter.htmlYou'd need to load the "adventerprisek9_ivs-mz" or "...
