Hi,Nous rencontrons un probleme d'audio sur les appels depuis jabber mobile et specialement vers des ponts de conferences. l'utilisateur nous signal que l'audio se coupe au milieu de l'appels.en attendant de reproduire le prob et d'avoir plus d'exem...
Hi , I'd like to know if there's anyone who can help or have seen this in the past. 8861 phones with expansion still disconnecting and cannot boot since the parameter " Power Negotiation " disabled on the phone. if the parameter is enabled , the ...
Hi, we have a rather strange problem on a cluster unity connection 10.5.2 .according to user complaints, it turns out that all voicemail messages received are all automatically deleted once the last one is deleted.However, I could not reproduce this ...
Hi all, i need to enable the voice feedback on the accessibility settings and unfortunatly the buttons is locked and it s impossible to activate it .we are using cisco ip phone 8841 and 8861 running on firmware sip88xx.12-5-1SR1-4 and cucm version: ...
hello everyone ,
i have to generate a phones report with specialy two importante field " PC Port Remote Configuration and Switch Port Remote Configuration" and i cannot find how to do it.
could someone can help me on this ? ,
many thanks for yo...
Hi Guys sorry for the french :(i translate : We are facing an issue problem with audio on calls from mobile jabber and especially to conference bridges.The user reported us that the audio cut off in the middle of the call.While waiting to reproduce...
Thank you very much, we are using a WS-X45-SUP7 line-card wich support only RJ-45 PoE IEEE 802.3af and Cisco prestandard .i am not sure that we can increase the max power with this type of line-card. for the moment, a colleague is forcing the "AdminC...
Hi Mike, i can see the AdminPwerMax and AdminConsumtipn is 15.4 W on the switch int : Available:3537(w) Used:1006(w) Remaining:2531(w)Interface Admin Oper Power(Watts) Device ClassFrom PS To Device--------- ------ ---------- ---------- ---------- --...
