About georgeef1

georgeef1 · 11-10-2009

Hi,I would like to know how to send certain syslog messages to certain hosts, and block certain others.For instance, I want to send the following types of syslogs to the following hosts:%SEC-6-IPACCESSLOGP xyz.abx.com%SW_MATM-4-MACFLAP_NOTIF xyz.abx....

georgeef1 · 10-30-2009

Hi,Is there a way we an creat MIBs and we can link it with CiscoWorks to monitor the information it will provide?-Thanks

georgeef1 · 10-29-2009

Hi,We are trying to creat more groups in CS and it gives an error as :"You have exceeded the maximum number of User Defined Groups. The limit is 200"Is that the max. limit or is there a way we can increase it?Or is it a Bug?-Please advise.

georgeef1 · 10-28-2009

Hi,We recently experienced a failover of our vss due to a parity error onthe supervisory module. We want to ensure that snmp traps andsyslogging is setup up correctly. We did not receive any notifications with our current configuration.Please sugges...

georgeef1 · 10-21-2009

Hi,I have 1900 devices not getting discovered. Only one got discovered after I added it as a seed device but it does not show the cdp neighbours in topology map.They have CAT OS and is there any issue with catOS devices :na100110#sh verCisco Catalyst...

georgeef1 · 11-11-2009

Thanks jclarke,Is there a way I can get just the IOS tracebacks from the device as a Syslog or a SNMP Trap.Though I am more concerned about the SNMP Traps if possible.Please advise.-Thanks

georgeef1 · 10-29-2009

Thank you for the information. Can you tell me what logging level to set for syslog in order to see the syslog messages?-Thanks

georgeef1 · 10-21-2009

Thanks jclarke,So finally, right now there is no possibility of - if a user has changed the password for login to ACS and if the same previous tacacs pwd was configured for DCR devices, LMS will not be able to give notification or sync the password w...

georgeef1 · 10-20-2009

Thanks jclarke,So it means if the I have 2 gen to be created via backup 0 and 1, the third time the backup will run it will overwrie backup gen either 0 or 1?But not like in LMS 2.6 as creating gen 2 and removing 0?PLease advice.

georgeef1 · 10-20-2009

Thanks Jclarke,One last question, if I upgrade to LMS 3.2 can I use the SNMP v2 option on my WLC?-Thanks

Member Since	‎02-17-2009 10:32 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	175

User Statistics

User Activity

Syslog messages

LMS MIB

LMS groups

SNMP and VSS

LMS 1900

Re: Syslog messages

Re: SNMP and VSS

Re: LMS and ACS

Re: LMS Backup

Re: WLC