I have 3 ASR 1001-X. I have upgraded all of them from IOS-XE 3 to IOS-XE 17 (along upgrading ROMMON TO 17.3.1). The problem isو just one of them is working properly now and two others are not. For example sub interface is not working but physical int...
I have a Cisco 6506 with two WS-SUP720-3B supervisors and s72033-adventerprisek9-mz.151-2.SY4a.bin IOS. I checked Cisco's Download Software section but I did not find the appropriate IOS according to my 720 supervisors.Any help is appreciated.
I checked the Cisco build and price and saw that the N9K-X96136YC-R line card just supports 100G as its uplinks. But what I see in the N9K-X96136YC-R data sheet is different. The data sheet shows that the uplinks could be 40/100G.Can somebody explain...
I'm investigating the pros and cons of integrating two separate networks in a single company. Imagine that we have a company with two separate networks. for example internal and internet networks. in the internal network, users can access the company...
I'm wondering if there is any command on cisco devices to show/identify its role as a router, switch and etc. like what we have on CDP neighbors but now for our local device with CLI. In other words, I need a command to identify the cisco device role...
As I said, I saw this description in the datasheet, but the description in the Cisco build and price is different.Nexus 9500 R-Series Linecard, 16x10G + 32x10/25G + 4x100G Nexus 9500 R-Series Linecard, 16x10G + 32x10/25G + 4x100G
