About ntalbot91

ntalbot91 · 05-19-2020

In my lab, I have a Dynamic VTI established between two routers. I'm exchanging routes via bgp between the two routers. Off my Branch VPN router (VPN1), I have a router(Node8) with a loopback and a point-to-point interface to the VPN1. My DVTI is up...

ntalbot91 · 03-10-2017

We have kind of a strange situation going on. We have a web server hosted in a DMZ located off our DMZ interface on our ASA. This web server has two NICs one of which is in a management vlan connected directly to our core switch bypassing the ASA the...

ntalbot91 · 09-09-2016

I have a request to forward a line after no one has picked up to a different extension but if that person doesn't pick up have the original forwarding extension pickup. In Short; extension 1111 forward to 2222 if no answer if there is no answer on e...

ntalbot91 · 06-10-2016

Hello, I have been tasked with upgrading a pair of ASR1002 (2RU) they are currently running 12.2(33r)XNC firmware and ios Version 15.3(3)S5. We will be upgrading to 9.03.13.05.S.154-3.S5. As per the release notes it is necessary to upgrade the ROMMO...

ntalbot91 · 05-20-2020

Hey Paul,Thanks for your reply. I was completely out of ideas last night, and I decided to go ahead, and migrate my routers from a dynamip 7200 image to an IOL image, and after doing that everything is working as expected. I made no other changes to ...

ntalbot91 · 05-02-2019

If they are directly connected, than you should not need a static route for all the subnets. They will already be in the table as connected. You should just need the static route on Site A > Site B Vlan 3 like you had in your post.

ntalbot91 · 03-11-2017

Thanks for your response, if it was my network i would :). Unfortunately, we only manage the firewall and a few switches for this customer. The vendor was adamant when i spoke with them last about it not being an issue on their side and was quite dif...

ntalbot91 · 09-09-2016

Thanks! It was just as you described Thanks again, Nick

Member Since	‎11-12-2015 05:53 AM
Date Last Visited	‎07-20-2020 02:21 PM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

Issue with Routing over Dynamic VTI

Assymetric routing on an ASA

Forward voicemail back to original extension

Upgrading ROMMON and IOS in one step

Re: Issue with Routing over Dynamic VTI

Re: Do you need a VLAN on each router? or just 1 router with a static route?

Thanks for your response, if

Thanks! It was just as you