Hi Amr,
sounds like the blade defo has the problem as the other 5 work. Once plugged in I assume this blade doesnt event show up in UCS manager as being discovered? If it does loop around in the discovery process try and go into the Maintainence opt...
Hi motenoob1,
In short yes ths will happen by design as described. You will need to configure LAN pin groups to engineer the flow of traffic. Basically ensuring only the SAN traffic goes via the SAN switches and the LAN traffic goes via the LAN swit...
Yup building a environment with multiple spof's. during the setup you will be asked about the cluster single node etc. Maybe a consideration in the future if you expand and look to add resillience later.
Daren
Agreed. You would want to PO straight into the 6K from the FIs. Where the external Fexs are used to connect rack mount servers. Below is diagram to show that part (minus the native FC you had)
