About bchris999

bchris999 · 12-12-2011

Hi Community,I have a Comms Manager 8.5 deployment with some remote branch offices. One of these offices is in a rual location and WAN connectivity is not great. CM works fine most of the time, however I am experiencing some mid-call drop outs. The s...

bchris999 · 05-17-2011

Are these products compatable?We were looking at quoting a UC500 with Unified CallConnector, but the client is wanting a cheaper option. Would the UC320 work with CallConnector (integration with Microsoft CRM).Many thanks,Chris

bchris999 · 01-07-2011

Does the 9971 support HHC control through the headset port like the high end 7900 series phones? Client has just purchased alot of 9971 phones and alot of high end Jabra PRO headsets to go with, but need to find some way of getting these to work so t...

bchris999 · 07-19-2010

I am wondering what happens to any out-of-band configuration after a license upgrade on a UC500 system.For the ephone-dn reserved and unassigned ranges, for example on a 48 user UC520, the ranges are as follows:user extensions: 10-117, unassigned: 11...

bchris999 · 07-22-2009

I am very dissapointed with Ciscos release of the SR520. I was excited at first having a good software feature set and rack mountable (about the only ADSL router I have found that doesnt need a shelf). My dissapointment was with the CCA config softwa...

bchris999 · 12-12-2011

Thanks for the information, however the calls are not between remote and main site, the calls are from the remote site to a PSTN number and breakout to a BRI line at the remote site. The only traffic to the main site is the call control.Thanks,Chris

bchris999 · 12-12-2011

Thanks for the information and the very quick reply. This is what I thought the answer would be unfortunatly.From the information I have given, can you think of any reason why calls may be dropping out?Thanks,Chris

bchris999 · 01-07-2011

Its the Jabra PRO 9470. The headset supports softphone, mobile and headset support. The usb in the back of the headset is used to connect to a Mac (which works well with Skype). At the moment, I have got around it by pairing over bluetooth, but this ...

bchris999 · 07-28-2010

I too am experiencing the same problem. Upgraded from 7.1.3 pack to 8.0.2 pack and the ringtones on our 7945 phones sound very distorted (some more than others). Would this be due to the updated ring tone files or the updated handset firmware? I will...

bchris999 · 04-20-2010

Similar question,We have a customer who is wishing to buy 2 x UC560 boxes, one as a primary and one as a standby (cannot get a 4 hour replacement on the hardware in the UK, or at least I cant find a part number for it anywhere... bring back the uc520...

Member Since	‎04-14-2009 12:38 AM
Date Last Visited	‎01-28-2021 09:43 PM
Posts	14

User Statistics

User Activity

Call drops at rural CM branch site

UC320 with Unified CallConnector

9971 HHC Support

Out-of-band Configuration and Licensing Upgrades

SR520 Dissapointment

Call drops at rural CM branch site

Call drops at rural CM branch site

Re: 9971 HHC Support

Re: UC520 Distorted Ringing

Re: UC560 License Transfer for RMA unit