About rmueller@cisco.com

rmueller@cisco.com · 12-13-2019

Hi all, one of my customer would like to create their own custom fields for guests (in Guest Access -> Settings -> Custom Fields) and query them within an authorization policy to assing a corresponding authorization result. However, the only fields t...

rmueller@cisco.com · 07-29-2019

Hi all, the current ISE installation guide for ISE 2.6 does not name any number of maximum supported PSNs per deplooyment anymore: https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/install_guide/b_ise_InstallationGuide26/b_ise_InstallationGu...

rmueller@cisco.com · 07-12-2019

Hi all, to my knowledge, currently ISE uses per default the source ip address of the RADIUS-request to look up the network device. This can cause issues if there are NAT-devices between the network access device and the ISE. Is there a known way ...

rmueller@cisco.com · 03-21-2019

Hi all, when integrating ISE with MS Intune, are we using the Intune NAC API at that point like described in here: https://docs.microsoft.com/en-us/intune/network-access-control-integrate I guess we are (otherwise would not make sense), but not 1...

rmueller@cisco.com · 03-15-2019

Hi all, for previous ISE releases (up to 2.4) the deployment guides always showed restrictions for the number of supported PSNs per deployment model (5 for medium, 50 for large). I don't see these anymore in the current installation guide for ISE v...

rmueller@cisco.com · 08-15-2018

Hi, the video link unfortunately does not work. How can I access this Video? Roland

rmueller@cisco.com · 08-06-2018

Jonathan, thank you very much - this explains it! Roland

rmueller@cisco.com · 05-29-2018

The customer want’s to have a quick and easy way for guests to connect to a secured guest network, not an open one.RolandRoland MuellerCONSULTING SYSTEMS ENGINEER.SECURITY SALESrmueller@cisco.com<mailto:rmueller@cisco.com>Tel: +49 711 2391 1306Cisco ...

rmueller@cisco.com · 05-15-2018

Hi Krish,thanks a lot for the response. The use-case for having separate deployments is because this customer has multiple tenants with overlapping address spaces, which would mean we have duplicate NAD addresses. So the customer might have to use at...

rmueller@cisco.com · 04-25-2018

Hi all,thanks a lot for the responses. Will check with the customer this week.RolandRoland MuellerCONSULTING SYSTEMS ENGINEER.SECURITY SALESrmueller@cisco.com<mailto:rmueller@cisco.com>Tel: +49 711 2391 1306Cisco Systems, Inc.City Plaza - 4th Floor R...

Member Since	‎09-15-2010 02:04 AM
Date Last Visited	‎05-03-2024 05:48 AM
Posts	53
Total Helpful Votes Received	32

User Statistics

User Activity

Query Guest Custom Field in Authorization Policy

Maximum number of PSNs supported per ISE 2.6 depoyment

Use NAS-IP Address to look up network device in ISE instead of source address

ISE and Intune integration: Are we using Intune NAC API?

ISE 2.6 network deployments: Number of supported PSNs per deployment model?

Re: Dynamic Attribute with ISE: VLAN Assignment

Re: Sharing IP-SGT-Mappings between Switches with inline propagation

Re: EAP-PEAP Public with ISE

Re: ISE policy-sync between two ISE depyoments via REST-ApI

Re: Replace ACS 5.8 with ISE for PPPoE auth