About nybble2012

nybble2012 · 09-10-2012

Hello all,I have a 2801 router with C2801-advipservicesk9-mz.124-24.T5, CME 7.1 installed and an isdn vic2-2bri-nt/te card.I'm trying to make phone calls with the ephones through and from the isdn line but in both cases i experience one way audio,the...

nybble2012 · 09-12-2012

Here is the active voice calling-number output and the controller statsCisctest#show call active voice calling-number 1002Telephony call-legs: 2SIP call-legs: 0H323 call-legs: 0Call agent controlled call-legs: 0SCCP call-legs: 0Multicast call-legs: 0...

nybble2012 · 09-12-2012

It was my mistake the above debug because when i make a call i don't even hear the ring tone so i don't know if the other party answer the call.The correct is this one:Sep 12 10:24:55.047: ISDN BR0/1/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0...

nybble2012 · 09-12-2012

Hello again,i updated to 151-4.m4 with CME 8.6 and still the same problem..I also replace the VIC2-2BRI-NT/TE card with a new one but nothing change..Here is the debug isdn q931 output:*Sep 12 09:49:54.195: ISDN BR0/1/0 Q931: Applying typeplan for s...

Member Since	‎09-06-2012 04:17 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

One way audio through isdn line

One way audio through isdn line

One way audio through isdn line

One way audio through isdn line