About Steven Gould

Steven Gould · 10-10-2016

Hello all, I have an issue with a 4506e chassis that was put in to replace a failing 3750 stack. The chassis is running a SUP 7 (WS-X45-SUP7-E) with five 48 port line cards (WS-X4648-RJ45V+E). The software version on the SUP is 03.06.05.E (cat4500e-u...

Steven Gould · 09-10-2012

We are using four digit extensions that match the numbers in the DID range that our telco has provided. Under the line configuration we are creating the External Phone Number Mask which includes the first seven digits (UK) and then XXXX as the extens...

Steven Gould · 09-06-2012

I have setup a hunt group with two numbers. When I call the hunt pilot number the first extension rings but then when the Reversion Timeout (set in the Line Group) expires I get a busy tone instead of it ringing the other number. I have tried re-crea...

Steven Gould · 10-15-2016

Thanks for the reply. That is interesting. Can you share a little more about your setup. Are you using AutoQoS or do you have a custom policy (or no policy?). What model of phone do you use? Are you SIP or ISDN for your external calls?

Steven Gould · 10-15-2016

My supplier sent two graded CP-7941G-GE phones for me to test with. They load and are supported by my CCM (phew). Ping tests from the connected workstations don't drop any packets and show a minimal delay so it looks like it was the switch inside the...

Steven Gould · 10-15-2016

The phones should have been operating with the cached loads from their last communication with the TFTP server prior to me changing the switch. Nothing about the load has changed so it shouldn't have changed anything. Yes, pings are still giving the ...

Steven Gould · 10-13-2016

I have an update on my issue. I have been in touch with my supplier and he is sending me some grade c 7961 phones to test with. Until they arrive I thought I would give everything one last shot. I removed the auto qos voip cisco-phone from a couple o...

Steven Gould · 10-13-2016

I'm running (hold your breath) CCM 4.1(3)sr2. This is on the basis of - if it ain't broke don't fix it. I'll see if our supplier can lend me a CP-7961G-GE for testing surposes. I believe these are supported by our version of CCM. Thanks for your resp...

Member Since	‎09-06-2012 07:23 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	18

User Statistics

User Activity

Packet loss and jitter on phones connected to 4506e switch

Called Party Transform Mask

Hunt Group Failure on Callmanager 4.1(3)sr2

Thanks for the reply.

My supplier sent two graded

The phones should have been

I have an update on my issue.

I'm running (hold your breath