I use Cisco SPA series phones and I utilize one touch button to park calls and the operator announces the parking lot number the call is parked on before the call is hung up. On the Cisco at least on Asterisk 11 this requires: Keep Referee When REFER Failed = Yes And the Extended Function or sidecar code: fnc=sd;ext=70@$PROXY;nme=PARK This works perfectly on Asterisk 11. On Asterisk 13 the button parks the call but you cannot hear the lot placement message like you do in Asterisk 11.   Has anyone else ran into this?     Thanks. ... View more

  SPA509G  7.6.2c   First off I have setup 100+ SPA5XX phones so I am familiar with the setup procedures.    I use a SPA509G as I do a considerable amount of testing with our PBX servers and the many lines make it much easier.     I cannot seem to register to two different PBX with public IPs that are in the same subnet.     The domain name resolves fine and that same phone registers to other servers within that TLD.   ext 1 cloudswitch1.example.com registers fine ext 12 cloudswitch2.example.com  Failed - Not Reachable   When I put in the IP address it works perfectly.      The DNS resolves properly and returns the same IP address I use when I enter the IP address in the proxy field.   Now when I reverse the order of the extensions  ext 1 cloudswitch2 registers fine ext 12 cloudswitch1 Failed - Not Reachable   Interestingly when I disable the cloudswitch1 extension in the SPA509G the cloudswitch2 registers to the hostname fine.         cloudswitch1 and cloudswitch2 are public IPs in the same subnet.  The hosts are x.x.x.79 and x.x.x.80   Any way you slice it its weird.    Always works fine when I manually enter the IP.   ... View more