Don't worry about it here are some screenshoots let's get the logs from the VPN client first 1-go to the tab call "log" 2-click on "log settings"3-on this menu put everything on level 3 and click on ok4-click on enable5-try to connect and copy/paste ...
Hi Nicole,Maybe using split tunnel instead of the tunnelall with local lan access here is a configuration example:http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml
Hi Carolina,Could you post the logs of the VPN client you can enable this under the tab call "log" on the ipsec client (remember to put on level 3 the log settings) to see why you are getting disconnected. Also if is possible you can change the tra...
