Hi,we have the following setup for our network :UserNetwork - ASA5550 - WAN Router 2911 - ISP Netowrk - Branch Routers 877s / 1941sSince last week we started noticing this problem that the branch users started to complain of slow application response...
Hi,we had just installed our ASA 5550 with IOS 8.0(2) a couple of week ago.2 interfaces from each slot are being used ie 0/0 for Branch users comming via MPLS cloud , 0/1 for internal LAN users comming form Core Switch & 1/0 for Server farm LAN ,...
Hi,we have a core switch 4507RE at the data center and 2 departments that connect to it via 10Gig fiber using X2-LRM modules.Each department has a 3 switch stack and both locations are identical w.r.t type and setup scenario .. the stack comprises...
Hi,we have a core switch 4507RE at the data center and 2 departments that connect to it via 10Gig fiber using X2-LRM modules.Each department has a 3 switch stack and both locations are identical w.r.t type and setup scenario .. the stack comprises...
Hi, we recently started to have a problem in on of the department (DeptB) which has 3x3750E stacked switches with X2-LRM (10G) module on port TG3/0/1 . this connects to the data center's core switch 4507RE's X2-LRM module on port TG2/3.on checking pi...
Hi hobbe,1) Inside works fine because ive had ping from my desktop to the ASA's inside itnerface without any problem.2) I get packet drop when i execute ping from the ASA to the WAN i get packet drops 97% success rate.3) They are directly connected ...
HI,im sure this should work on your C6509, you can try using IP SLA for configuring 2 default routes.. so if one destination is unavailable, the other route is picked up..eg..192.168.0.1 is your f/w 1 & 10.0.0.1 is ur f/w 2 behind both the f/ws i...
from the data center side i swapped the modules and the patch cords one by one..the module and patch cord working on dept A are now on Dept B's place but the error remains the same..this means that its gotta be from the 3750's side.. either the fib...
