About paulo.rio

Backup user account · 11-18-2016

Hello, I have a installed a CUCM in v11 and was trying to create a DRS (backup) only account. I have created a new account with "set account name " with Privilege level of Ordinary, the lowest, but that account have to much access. Questions: 1 - Ca...

paulo.rio · 08-21-2012

Hi,I have installed a VCS Starter Pack Express with 3 SX20, 1 MCU and some Jabber Video (Movi) clients. I have configured the system to use TCP/SIP 5060 for comunication.I started using Jabber video version 4.4.3 and my problem is that the client is ...

paulo.rio · 07-27-2011

Hello,I have upgraded CUCM Cluster from version 7.1.(2) to 7.1(5). The Cluster is made of 1 Pub, 8 Subs and 2 TFTP's. The CallManagers are located behind a FW and are synchronizing NTP with two Cisco Routers. I have External Syslog configured for all...

paulo.rio · 10-27-2017

Hello, according to the documentation this feature is available. "Cisco Nexus 2348UPQ FEX ASIC supports native FC ports. This feature was introduced in 7.3(0)N1(1)". https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/fcoe/7x/b_56...

paulo.rio · 11-29-2016

Hello, For me to delete the server, I also have to delete in the "Presence Redundacy Group", the DefaultCUPSubcluster. After that, I have deleted the server with no problem. Paulo Rio

Hi Jaime, · 11-18-2016

Hi Jaime, I have never notice that information in the manual. Very useful response. Thanks Paulo

Hello, · 11-18-2016

Hello, I think that I have explained wrongly. 1 - Can I create an account that have only access to DRS? 2- What is the difference between privilege level 0 and 1, or where can I find a matrix where explains what cli commands belongs to each level? ...

paulo.rio · 09-13-2012

Hi,I had to open a TAC case so this could be identified. After changing Encryption Policy = ForceTcpNoSrtp, the Jabber was working fine.Thanks

Member Since	‎07-24-2008 04:25 AM
Date Last Visited	‎02-05-2024 12:29 AM
Posts	11

User Statistics

User Activity

Backup user account

Jabber video lossing connection with VCS

CUCM 7.1.5 - Syslog error with NTP

Re: Issue Configuring ports as FC and FCoE in Nexus 2348UPQ

Hello,

Hi Jaime,

Hello,

Jabber video lossing connection with VCS