About Juan Perez

Juan Perez · 11-20-2020

Hi Preston, Got it now. Thanks for the help on this one!

Juan Perez · 11-19-2020

Hi Preston, Thanks so much for your reply. Let me ask you a few questions based on your answer as I ...

Juan Perez · 11-18-2020

Hi, I am setting up a new DNA-C hardware appliance from scratch, by reading the documentation I can ...

Juan Perez · 09-13-2012

Hi Carlos,Probably what they wanted you to do was the following:ip access-list extended BLOCK_TELNET...

Juan Perez · 12-13-2011

Hi,There is a problem with authentication for sure, National device sends out a TERMREQ once it rece...

Juan Perez · 12-08-2011

Hi,Yes please capture the outputs from the National router. Depending on the model we can try differ...

Juan Perez · 12-07-2011

Hi Juan,It would be an RJ-48 straight cable RJ48-RJ48 when connecting to Smart Jack or crossover whe...

Juan Perez · 12-07-2011

Hi Bret,This can be "solved" by playing with local and remote clocking settings, the limitation here...

Juan Perez · 12-07-2011

Hi Juan ,It depends on whether you are going to use it back-to-back (crossover) or connecting to TEL...

Juan Perez · 12-07-2011

Hi Bret,Thanks for the info. I think we are dealing with a clocking issue (limitation) here. Are the...

Juan Perez · 12-07-2011

Hi,Why don't you try to use IP SLA:conf tip sla 1 icmp-echo 4.2.2.2 exitip sla schedule 1 life forev...

Juan Perez · 12-07-2011

Hi Bret,There is a similar command for VWICs but I would not recommend it based on the problem descr...

Juan Perez · 12-07-2011

Hi Dan,T3 controller is down and showing AIS, which most likley is coming from upstream devices. Is ...

Juan Perez · 12-07-2011

Hi,Thanks for the configs, is ti possible to enable below debugs:- debug modem- debug confmodem- deb...

Juan Perez · 12-06-2011

You are welcome Dan!

Date Registered	‎06-16-2008 06:11 PM
Date Last Visited	‎11-20-2020 12:56 AM
Total Messages Posted	60
Total Helpful Votes Received	24

Re: DNA-C Internet connectivity interface