Hi everyone! I stuck at point, can anyone explain me how to configure Cisco FMC to automatically switch to second Internet channel, when main is down. I have this config route Outside_KTC 0.0.0.0 0.0.0.0 188.127.36.49 5 track 3route Outside 0.0.0.0 0...
Here below is an information about 9k switches with embedded WLC. List does not contain 9200 models, only 9300 and upper. https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-744299.html
Thanks a lot, second link was a really helpful. You have to use Auto NAT rules, but can't use the same source objects, so you have to create 2 different network object with the same address space inside. It works!
