About james8

james8 · 07-13-2021

Hello folks,We have an AP 1572eac, that is not booting. When we connect the power 4 leds start do blinking simultaneously, and the AP do not boot, no console, no rommon. What's strange that if we let the AP powered off for some time, after that the A...

james8 · 08-14-2019

Hello guys, There is more than 24 hours that I´ve submitted an inventory to SNTC portal from collector but the status is still "Received". Is there anything that can be done? thanks!

Delete an user from SNTC · 07-20-2019

Hello guys, I am the DA, but I am not able to delete an user , from SNTC Portal, that has left the company. How can I proceed., he was was also a DA. Thanks in advanced

james8 · 11-08-2018

Hello guys, I am in doubt which IOS version correct the Smart Install Vulnerability for 2960-TC. In the IOS release notes for version 12.2(55)SE12 says that it was correct in this version. But when running Cisco IOS Software Checker says that is on...

james8 · 07-15-2021

Hello guys, Making more tests, the problem is the internal power supply from the AP. Using the power injector works fine. So RMA needs do be done. Thanks

james8 · 07-14-2021

Hello Rps, Unfortunately, I am not able to get the logs, as I said It boot for few time. I´ve added the console info, that I could take before it locks again and starts do blinking all four leds.

james8 · 11-13-2018

Hello guys,I got in touch with TAC and they said that the correction is available in version 12.2(55)13, but this version is not release yet for download.

james8 · 11-09-2018

Hello sharifi, Thanks for you help. The problem is that Cisco did not release the version 12.2(55) SE13 for C2960-TLC models.

Member Since	‎04-14-2018 10:35 AM
Date Last Visited	‎07-18-2021 11:57 AM
Posts	8

User Statistics

User Activity

AP 1572 not booting

SNTC Upload Processing

Delete an user from SNTC

Cisco Smart Install Vulnerability

Re: AP 1572 not booting

Re: AP 1572 not booting

Re: Cisco Smart Install Vulnerability

Re: Cisco Smart Install Vulnerability