Hello Everyone, i hope you are all well, Guys we have a client facing a roaming issue with jabber when he roams from wifi to 3g and vise versa the call issue was reported and tested on version 11.5 su10 latest with expressway version x12.7 latest, Ca...
hello community, i hope you are all well,please note that i have faced a strange issue with these phones "7940/7960" and i would love to share it and how it was resolved, a cluster with 7940/7960 phones was upgraded from call manager 10 to 12.5 aka 1...
Hay everyone
If you are trying to activate a new expressway installation in 2019
all new expressway paks generate are generated for version X12.5.0 and above
so you will get Invalid Release Key if you try it for version X8.x example X8.11.4
i have...
Hello everyone
you have been wondering why the expressway 8.11 series has been removed from the website
its due to this
"https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181107-vcsd"
Don't be alarmed Cisco tac sa...
Good morning everyone
i have an issue with a customer in Saudi Arabia cant get caller id to work the PSTN provider is STC
i have cisco 2901 with VIC2-2FXO
i have tried CPtone SA , CPTone Br , CPtone US
i have also tried:
-no battery-reversal
...
Hay friend
i had this issue before
u have to do 4 things
1st enable advanced mode in the top
2nd disable fast lane
3rd in ssid go to advanced and disable 802.11k , 802.11r , 802.11v
4th enable client band select and client load balanc...
hay friend
you could be hitting a bug with old versions of mobility express
try to update to the latest version in 8.5.140
and see if it helps with the flapping issue
hello friend
this ap doesnt need poe plus
so a normal power injector should work but it should give at lease 15.4W
try to shut no shut the >> Int dot11radio0
also if ur ssh put terminal monitor so u can view the logs as they show up
als...
