About dwatson777

dwatson777 · 02-04-2014

I am having trouble configuring a 2951 router (IOS c2900-universalk9-mz.SPA.153-2.T) with Bell Canada DSL 15Mb up/down and a EHWIC-VA-DSL-M card. I have tried everything I can think of to get this to work without any luck. We use DSL as a failover ba...

dwatson777 · 05-01-2008

I'm pretty new at VPN as a backup and not familiar with the 1700 series but if you are trying to get a tunnel to open don't you need a tunnel interface? I don't see one in this config.

dwatson777 · 04-25-2008

I have uprgraded the IOS on this 2801 router to "c2801-advipservicesk9-mz.124-15.T3.bin" and I have upgraded the firmware for the HWIC-1ADSLI to "adsl_alc_20190.3-0-33.bin". I have seen no change in the initialization. I e-mailed Covad support and to...

dwatson777 · 04-16-2008

Just a little more info. When I had debug atm events and errors on I saw this:*Apr 16 10:33:43 CDT: DSL: Downloading init_AMR-R-2.5.042_no_bist.binSo is my fw a little behind or is this the DSLAMs?

dwatson777 · 04-16-2008

My bad, I was thinking of FW (firewall). When I do "sho dsl int atm 0/1/0" here is what I get:Router2#sho dsl int atm 0/1/0 ATM0/1/0Alcatel 20190 chipset informationLine has not yet been activated. No information available.DSL: Training log buffer...

dwatson777 · 04-16-2008

No BRI Service. Straight ADSLoISDN. We have connectivity from PC to internet when we are using the modem. No FW on this router. Using this as VPN backup. setup as PPPoE. When tunnel comes it will go through our corp FW.

Member Since	‎02-12-2007 07:40 AM
Date Last Visited	‎04-09-2020 10:17 PM
Posts	7

User Statistics

User Activity

Trouble with EHWIC-VA-SDL-M configuration

Re: Unable to establish IPSec LAN to LAN tunnel through a DSL li

Re: ATM Interface output shows initializing

Re: ATM Interface output shows initializing

Re: ATM Interface output shows initializing

Re: ATM Interface output shows initializing