Hi,I have an ASA 5505 configured with Site-To-Site VPN to an ISR at headquarters (Remote Site to headquarters). The VLAN2 int is configured with a public IP to the Internet router . This public IP was given to us by the client, where we are leasing ...
I created a one-to-one NAT statement but when I try to ping the public ip address from the outside, it won't responde. Here is the NAT statement. Any assistance would be greatly apprecaited.nat(inside) 0 access-list nonatnat(inside) 1 0.0.0.0 0.0.0.0...
Hi all,I am new to Firewalling and I have a project that I need to implement at a customer's site. Here is the current network design: Customer's Site: ASA 5505 connected through customer's router Outsite Interface: IP 126.x.y.z ...
Thanks for the info. This is really helpful. I was wondering if there was a command to disconnect all the VPN active users without resorting to reloading the ASA. Is there such a command? Thanks in advance. Best, ~ zK
Thanks for the response.I created a one to one NAT statement but when I ping the pubilc ip address from the outside, it doesn't responde. Can you tell me what I am doing wrong? Here is a sample of thenat statement:nat (inside) 0 access-list nonatnat ...
Thanks for the response. We currently have a 2800 ISR with 4 remote sites having ASAs(VPN) connecting to the ISR. If we were to consider implementing BitTorrent, would it still pose a security issue? I mean since we all hosts will be within the corp ...
