About vantipov

vantipov · 11-21-2019

I am trying to attach two identical baremetal linux servers with Mullanox 40Gig cards to ACI fabric. One to Leaf103 and another to Leaf104. Both Leaves are C9336C-FX2. I am getting no light on the switch interfaces or on the NICs. LED on the leav...

vantipov · 03-13-2018

I have deployed Common Services Platform Collector and successfully retrieved my devices information, created upload profile and uploaded the inventory 3 times via the collector. Portal shows three uploads succeeding, but I still show no devices in ...

vantipov · 03-12-2018

I configured the version 2.7.3 today and ran my first discovery using correct SNTP strings. I show no Serial Number info on this Managed Devices tab. This is the main reason I deployed this. What am I missing?

vantipov · 08-09-2017

I am trying to create a CLI template for Prime 3 that will go through all L3 interfaces on a switch and if an interface has a specific ip helper-address entry then replace it with a new entry. For example, I may have 5 or 10 L3 VLAN interfaces on a ...

vantipov · 04-24-2017

I need to apply "mls qos trust dscp" on my new cat3850s and cat4510s. But the syntax must have changed because I get no mls if I do #m? at the global config or per interface. I am running 3.7.1 on both 3850s and 4510s with LANBASE license. What is...

vantipov · 09-15-2021

Having similar problem where I was upgrading code on N9K-C9336PQ spines from 14.2.2f to 14.2.7f via APIC GUI. I scheduled the upgrade with "pause on failure". First spine failed to upgrade and went into loader prompt. Now I cannot get it to boot t...

vantipov · 08-19-2021

Supper helpful. Thank you.

vantipov · 03-14-2018

As of this morning everything has populated in the portal. Thanks for looking at this issue with me.

vantipov · 03-13-2018

Ok, I will check in tomorrow morning. Thanks again.

vantipov · 03-13-2018

So I re-ran the process as you recommended and ended up with the same result. I started looking at the portal and it seems that under Inventory Insight it shows that exactly 332 devices are placed in the "Not Collected" category with the reason code...

Member Since	‎03-29-2004 12:13 PM
Date Last Visited	‎11-23-2023 12:47 PM
Posts	84
Total Helpful Votes Received	6

User Statistics

User Activity

ACI Error F0532 on 40Gig Port

SNTC - nothing shows up in the inventory on the portal

No Serial Numbers in Discovery

Prime CLI Template for IP helper change

mls qos trust dscp supported syntax

Re: ACI Upgrade ISSUE

Re: ACI Automation Part 4 - ACI with Postman On Combining Multiple EPG

Re: SNTC - nothing shows up in the inventory on the portal

Re: SNTC - nothing shows up in the inventory on the portal

Re: SNTC - nothing shows up in the inventory on the portal