Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How to configure wakeonlan from one pc to another on the same vlan and same subnet.I have tried configuring a static entry in the arp and mac address table without success.A packet capture from the wol source only shows an arp request being sent.Is ...
Hello,The http server web interface header is missing information that would be nice to have.The switch was like this during first log in.I did update the IOS/Web UI to Release 15.2.7E3 but same results.Here's a screenshot.
Hi, I restarted Catalyst 2960L-8PS switch today, but the switch never came back up. I consoled in and found that the switch was constantly restarting. The error messages are: 1.) Verifying MCU firmware... Fail2.) MCU firmware Upgrade Fail - failed to...
I have a ubuntu host laptop with windows 10 guest running in VMware Player. The Anyconnect client running on Guest OS cannot connect to asa vpn without changing VMware Network Adapter from NAT to Bridge. But, when I enable MAC filtering on the WAP517...
Im trying free up space on an ASA 5506-x and was curious which files can be removed after installing updates. 102 -rwx 111641184 10:58:02 Apr 05 2019 asa992-40-lfbff-k8.SPA
103 -rwx 84 00:44:23 Apr 15 2019 .boot_string
11 d...
Thanks for all the reply's. On this Intel Gigabit 4 port NIC in this older Dell R620.I had to Enable PME and disable Energy Efficient Ethernet by going to Device manager -> NIC 1 properties -> Advanced Tab.Also, under the Power Management Tab in devi...
Source is raspberry pi 4 with wakeonlan package installed. (apt install wakeonlan)Destination is Dell R620 nic1 with wake on lan enabled in bios. Switch Model - C2960LIOS Version 15.2(5r)E3
Source is raspberry pi 4 with wakeonlan package installed. (apt install wakeonlan)Destination is Dell R620 nic1 with wake on lan enabled in bios. Switch Model - C2960LIOS Version 15.2(5r)E3 Below is config for both pi and R620 interfaceswitch.lan# sh...
The link provided didn't exactly relate to my case, but I did downgrade to E2 (the previous release) and now the Web UI is a blank page.Switch still works, web ui does not.
